e-mail:
support@broadcasttools.com
voice:
360.854.9559
fax:
866.783.1742
7
AVR-8 Installation and Operation Manual
PROGRAMMING
PROGRAMMING
To record a voice message to be associated with relay number one: press the program
button, 41; the record led will turn on. Then speak your message into the telephone
and press the program button when done.
WEBSITE:
Visit our web site for
product updates and
additional information
Messages
Keypad entry
Time (Seconds)
Relay 1 Description
41 (Record Relay Message)
4.2
Example:
41
“Microwave transmitter”
Relay 2 Description
42 (Record Relay Message)
4.2
Example:
42
“Building light”
Relay 3 Description
43 (Record Relay Message)
4.2
Example:
43
“Security System”
Relay 4 Description
44 (Record Relay Message)
4.2
Example:
44
“Surveillance Camera ”
On
45 (Record Closed Message)
4.2
Example:
45
“Is on”
Off
46 (Record Open Message)
4.2
Example:
46
“Is off”
Input 1 Description
51 (Record Input Message)
7.2
Example:
51
“Right channel Silence”
Input 2 Description
52 (Record Input Message)
7.2
Example:
52
“Left Channel Silence”
Input 3 Description
53 (Record Input Message)
7.2
Example:
53
“Generator”
Input 4 Description
54 (Record Input Message)
7.2
Example:
54
“Transmitter door”
Input 5 Description
55 (Record Input Message)
7.2
Example:
55
“Plate voltage”
Input 6 Description
56 (Record Input Message)
7.2
Example:
56
“AC power”
Input 7 Description
57 (Record Input Message)
7.2
Example:
57 “Tower lights normal”
Input 8 Description
58 (Record Input Message)
7.2
Example:
58
“Tower lighting alarm”
Greeting Message
59 (Record Sign on Message)
7.2
Example:
59
“KKFS Transmitter site monitor, enter your password
after the tone”
Restoring to factory defaults:
Hold down both the RST and PGM buttons. Release the RST button first and then the PGM button a
second or two later.
