e-mail:
support@broadcasttools.com
voice:
360.854.9559
fax:
866.783.1742
3
RJ-XLR Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of the RJ-XLR 8F 8M, RJ-XLR 16F, or RJ-XLR 16M
Breakout Panel, which we will refer to throughout the manual as the RJ-XLR
Breakout Panel or RJ-XLR. We are confident this product will give you many years
of dependable service. This manual is intended to give you all the information need-
ed to install and operate the Broadcast Tools® RJ-XLR Breakout Panel.
SAFETY INFORMATION
Only qualified technical personnel should install the RJ-XLR Breakout Panel. Any
attempt to install this device by a person who is not technically qualified could result
in a hazardous condition to the installer or other personnel or damage to the RJ-XLR
Breakout Panel or other equipment. Please ensure that proper safety precautions
have been taken before installing this device. If you are unfamiliar with this type of
equipment, please contact a properly qualified engineer to handle the installation
and setup of the RJ-XLR Breakout Panel. Broadcast Tools, Inc., is unable to support
NON-Broadcast Tools software, hardware or NON-Broadcast Tools computer/hard-
ware/software problems. If you experience these problems, please research your
hardware/software instruction manuals or contact the manufacturers technical sup-
port department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment. If you would like
more information about BROADCAST TOOLS® products, you may reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:support@broadcasttools.com
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.
Broadcast Tools is a Veteran Owned Business
Designed, Assembled and Supported in WA State, USA
