7
Check the Wi-Fi name and input its password. Tap Next so that the
Universal Remote
will be
added as a device. The process may take 20-60 seconds, depending on network conditions.
Once the configuration is completed, the blue Wi-Fi LED will flash slowly then turn off, choose a
room for the device and tap Done.
Note:
1.
Please keep the device and your phone in good Wi-Fi signal range.
2.
A reset can resolve most issues: Reset your
Universal Remote
by
inserting a needle into
the designated reset button keyhole, press and hold, for at least 6 seconds until
the blue Wi-Fi LED flashes rapidly, then repeat the configuration process.
If you fail to configure the
Universal Remote
using the above method, please tap Try other
methods and follow the in-App wizard to enter AP mode configuration: Insert a needle into the