18
System Updates
From time to time Broadview Networks will make updates to your system via software changes
on our network. To ensure your system is up to date with the most current release of software,
momentarily disconnect power from the Simplicity base station (leave the Ethernet cable
connected) and then reapply power. If new software is available the base station will download
it from Broadview’s servers and install it on the base station and the phones. During the
software upgrade process the base station LED will blink amber and then blink blue for several
minutes. The display on the phones will read “Provisioning” and then “Rebooting System”.
Do NOT remove power during the process. Wait until the LED on the base station
glows steady amber for a few minutes and the phone display has returned to normal
before making any calls. You may repeat this process occasionally to be sure your
software is always up to date.
LED