2
User Manual
Broadband Blaster 8012-V
Important Safety Instructions
This section provides basic safety information for your Creative
Broadband Blaster DSL Bridge
8012-V modem.
Prior to using your modem, carefully read and understand the safety instructions. These
instructions must be followed to reduce the risk of fire, electric shock, or personal injury.
•
Make sure that your modem is not exposed to direct sunlight or excessive heat
radiation.
•
Keep your modem at a place where there is minimum risk of spilling any liquid.
•
The surrounding ambient temperature must not exceed 40
0
C (104
0
F).
•
Avoid humid conditions. Do not place the product near a water source or outlet such as
a bath tub, sink, wash bowl, laundry tub, swimming pool, rain, wet or humid wall, and
so on.
•
Never clean your modem with a damp cloth or use any liquid cleaner.
•
Do not press, put any weight, or bend the power cord connected to telephone
equipment.
•
To avoid risk of an electric shock during lightning, do not use any telephone equipment
that is connected to an electric socket.
•
In case of a gas leak, do not use any electric switch that is located in the vicinity of the
leak.
•
To report a gas leak, do not use any telephone equipment that is connected to an
electric power outlet in the vicinity of the leak.
•
Do not use any electric product, electric cord, or power socket that is even partially
damaged.
•
Do not expose yourself to dangerous voltages by opening the cover of your modem or
dismantling it.
•
You must not access the internal assembly or circuit board of your modem — none of
its parts are user replaceable.
•
Do not dispose off the batteries in fire — they may explode and cause injury. Besides,
you must follow the local codes for special disposal instructions.
•
If your modem needs any service or repairs, only qualified service personnel must
handle it.
