9
D
UCTED
INSTALLATION
:
Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be
inside the flue. Secure the upper flue to its bracket using 2 M4 x 12 Phillips 9 mm
round
head screws.
NOTE: Duct not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue and the hood.
HO0292
U
PPER
FLUE
MOUNTING
BRACKET
F
RONT
VIEW
U
PPER
FLUE
HO0293
N
ON
-
DUCTED
INSTALLATION
:
Slide up the upper flue until it is aligned with the plenum. Secure the upper flue to the
plenum using 2 M4 x 12 Phillips 9 mm round head screws.
Remove protective plastic film covering the upper flue and the hood.
11. INSTALL THE DECORATIVE FLUE (
CONTINUED
)
12. REINSTALL GREASE FILTER(S)
A
LL
INSTALLATIONS
:
To reinstall the grease filters, align rear filter tabs with slots in the hood. Pull
down the metal latch tab, push each filter into position and release. Make
sure filters are securely engaged after installation.
HD1149
N
ON
-
DUCTED
INSTALLATION
:
Install a charcoal filter on each aluminum grease filter back (
A
). Hold the
charcoal filter in place by inserting both ends of the 3 metal strips in each
aluminum grease filter frame (
B
).
HA0145
A
B
