Broan NuTone RDMWT2, Installation Manual

RDMWT2 Installation Guide

Page 2

For use with 1, 2 or 3-Hour-Rated Floor-Ceiling and Roof-Ceiling Designs. 
UL/ cUL Listed for use in the following Floor Ceiling and Roof Ceiling Assemblies: L521, L528, L546, L558, L562, 

L574, L576, L581, L583, L585, P522, P533, P538, P545, and P547 when installed per the following instructions.
Flat Ceiling / Horizontal Mount Only.
For use with the following ventilation fan models:
Broan AE110-B, AE50110DC, AER110KC, AE110K, AE80K, A80-B, A80HD-B, AE50-B, AE80-B, AE80B-B, A110-B, 

AER50-B, AER80-B, AER110-B, AR80X-B, AR110-B, AE50110DCS, AE110S-B, AE80S-B, AE80BS , AE50110DCL, 

AE80BL-C, AE80L-C, AE110L-C, AER110L-C, AE80LK, AE110LK, AE50110DCSL, AE80SL-C, AE110SL-C
NuTone AEN110-B, AN80C-B, AEN50-B, AEN80-B, AEN80B-B, AN110-B, AERN50110DCKC, AERN110K, 

AERN80K, AERN80KC, AEN80BS , AEN80BL-C, AEN80L-C, AEN110L-C, AERN80LK, AERN110DCSL

Usage

Remove Blower & Wiring Panel

The following steps are best performed on a work surface before 

fan installation. Protect counter tops by placing corrugated sheet 

under the fan.

1.  Remove blower and all packing material from fan housing.

2.  Remove wiring 

panel from fan 

housing.

3. Discard 

plastic duct connector supplied with fan. It must not 

be used.

4. Install 

metal duct connector supplied with radiation damper.

a. Push duct connector through opening from inside of 

housing.

b. Engage tabs and secure with #8-18 hex head screw from 

parts bag.

CAUTION

•  Do not use 

plastic duct connector 

supplied with fan. Replace this part with 
metal duct connector supplied with 
radiation damper.

Install Metal Duct Connector

TABS