- 7 -
9. INSTALL THE HOOD
Run power cable to installation location. Place the hood to its location. Mark the position of the screws (smaller
part of the key holes) with a pen. Remove the hood and install the (8) 1/2” double thread screws leaving a 1/8” gap
(4 screws for 30” hood). Remove wiring cover, place the wire clamp, insert the cable in the hood and tighten the
wire clamp to secure the cable. Place the hood under the cabinet and slide it in position. Make sure the
adapter/damper assembly enters the ducting. Secure the hood by tightening the screws completely.
10. CONNECT WIRING
Connect cable to wiring box using wire connectors.
Connect BLACK to BLACK, WHITE to WHITE, and GREEN under ground screw. Reinstall wiring cover.
DO NOT
FORGET TO CONNECT THE GROUND
.
::
rangehoods
.
com
Call 1-800-667-8721 anywhere in the US and Canada
-
www.rangehoods.com
U N L I M I T E D
Broan at
::
rangehoods
.
com
is a division of
kitchen
::
accessories
