- 9 -
Plug the blower unit into the female receptacle and the power supply into the male connector inside the hood.
12. LIGHT BULBS
This range hood uses 50W halogen lamps. (120V, 50W, PAR 20)
Install the lights by rotating clockwise.
13. HEAT LAMPS
The heat lamps required are 120V, 175W max, infrared bulbs. (120V, IR 175W, PAR 38)
You can use white halogen lights if warming shelves are not used. (120V, 90W, PAR 38)
Install the lights by rotating clockwise.
14. INSTALL FILTERS
It is recommended to install side filters first and finish with center one(s).
1.
Insert upper end of filter into the hood. (tap end)
2.
Raise lower end toward the inside of hood.
3.
Position lower end of filter into channel and pull.
4.
While pulling the filter, slide it under the inner retaining piece.
Baffle filters are available as an option. (see instruction sheet included with baffle filters).
::
rangehoods
.
com
Call 1-800-667-8721 anywhere in the US and Canada
-
www.rangehoods.com
U N L I M I T E D
Broan at
::
rangehoods
.
com
is a division of
kitchen
::
accessories
