MAIN SPINDLE CONTROL
Main Spindle Control has “forward, reverse and stop” positions.
ADJUSTING HEADSTOCK
By loosening the lock handle (11) & turning handle (7), the headstock can be moved up and
down.
Loosening the lock nuts on the headstock allows the headstock to be leaned ±90º. Make
sure to lock the handle (11) and all lock nuts before operating the drill.
Adjust return spring by adjusting spring in figure (9), loosening the handle (2) and turning
spring base (1) allows the adjustment of spring force, lock handle (2) once you have desired
force of spring return .
ADJUSTING SPINDLE FEED
Turning the handle towards you (1) will drive the spindle downward. Loosening the handle
(8), the spindle automatically is returned under the spring force.
ARBOR/TOOL RELEASE
Turning the dial (12)
to the “↓” position and
pushing the handle (1) upward will allow the
arbour/tool to be removed. Turning the dial to the
“↑”
position will allow the arbour/tool
to be installed again.
DEPTH DRILLING
Turning nut (9) to adjust block (6) allows adjustment of depth control of drilling.
ADJUSTING WORKTABLE
Loosening lock handle (14) and turning handle (13) allows the worktable to be moved up
and down.
Loosening the lock handle (14) also allows the supporting block together with the worktable
to be rotated 0-360° around the column.
Loosening lock handle (10) allows the worktable to be rotated 360°
The working table can be leaned ±90° after loosening nuts (16).
Summary of Contents for BDF32-1
