Brobo Group
brobo.com.au
2.3. Advice for the Operator
Protective eyewear or goggles must be worn at all times
while attending & operating the drill.
Do not attempt to operate the machine unless all safety guards are in operation.
Ensure that
hands & arms are kept clear of the drilling zone
when the machine is operating.
Do not wear loose clothing
with long sleeves & oversized gloves, bracelets, necklaces or any
other loose object that may become entangled in the machine’s tooling bit during drilling. Long hair
must be tied back or placed in a hair net.
Always disconnect the power supply to the machine before carrying out any maintenance
work or adjustments
. This includes cases of abnormal operations of the machine.
Any maintenance work performed on the hydraulic, pneumatic or coolant systems must be carried
out only after the pressure in the system has been released.
The operator
MUST NOT
conduct any risky operations or those not required for the drilling in course
(e.g. remove swarf shavings from the machine while drilling).
Never move the drill while the machine is operating.
Always keep the workplace are as clean as possible
.
Remove equipment, tools or any other objects from the drilling zone.
Support the workpiece
to prevent it falling or jamming during the drilling cycle.
Summary of Contents for BDF32-1
