Brobo Group
1.4. Anchoring the Saw
Prior to anchoring the saw unit, take into considerations the requirements mentioned in
Section 1.3
and
Section
2.2
,
and other aspects regarding the usage of the machine such as accessibility to cut parts and safe access for the
operator.
The base of fabricated stand (if applicable), in which the saw head rests on, is anchored to the floor by 4
M12
bolts provided. For added stability, it is strongly recommended that the machine stand be fastened to the floor by
using loxins (not provided). When positioning and fastening the unit, please refer to the hole locations shown in
Figure 2
.
Figure 2.
Anchoring Hole Locations
FRONT OF MACHINE
FRONT OF MACHINE
FRONT OF MACHINE
FRONT OF MACHINE
BENCH MODELS
(Fig. 2.1 & 2.2)
FLOOR MODELS
(Fig. 2.3 & 2.4)
Figure 2.1
Figure 2.3
Figure 2.2
Figure 2.4
