108
Brocade Adapters Troubleshooting Guide
53-1001582-01
HCM and Installer Message Reference
B
Choose any of the event
severity levels to filter.
Occurs when the user selects an event severity
level, and then clicks OK in the Master Log
Filter dialog box.
Select at least one severity level
(such as major or minor), and then
click OK in the Master Log Filter
dialog box.
Event Filter cannot be
launched while the Event
Properties dialog is
open.
Occurs when the user tries to launch the
Master Log Filter dialog box while the Event
Properties dialog box is open.
Close the Event Properties dialog
box, and then launch the Master Log
Filter dialog box.
Clear Filter cannot be
performed while the
Event Properties dialog is
open.
Occurs if the Event Properties dialog is kept
open and the user clicks Clear Filter.
Close the Event Properties dialog
box, and then click Clear Filter to
clear configured filters.
Invalid time range. Enter
a valid time range.
Occurs when the user enters an invalid time
range in the Masterlog Log Filter dialog box.
Enter a valid time range and collect
the events logged for that time.
The CHAP Secret and
Retype Secret fields
must have at least 8
alphanumeric
characters.
Occurs when the secret key provided in the
CHAP Secret and Retype CHAP Secret field is
less than eight alphanumeric characters.
Provide a proper secret key which
has at least 8 alpha numeric
characters.
Cannot find the adapter.
Try again later.
Occurs when user enables or disables the
adapter in the following scenario.
1
HCM discovers the adapter and places it
into the product tree.
2
Another user removes the adapter before
the next discovery.
3
User now tries to enable/disable the
adapter.
Refresh the product tree and check
if the adapter is still available.
The WWN or MAC
address already exists in
the All WWNs/MACs
table. Edit the existing
record(s). Record(s) with
the same WWN address
are highlighted.
Occurs when user enters a WWN or MAC
address which is already present the
WWN/MAC field in the Devine Names dialog
box.
Check the same WWN or MAC
address is available in the
WWNs/MAC view of the Configure
Names dialog box. Enter a different
WWN or MAC address.
Duplicate File: <Export
File Name>. Do you want
to replace the file?
Occurs when the user exports names to a file
that already exists.
Try to export the names with a
different file name.
Name should start with
an alphabet. Allowed
characters are 0-9, A-Z,
a-z, hyphen (-) and
underscore (_) and
should not exceed 15
characters
Occurs when user provides a invalid name with
special characters other than hyphen and
underscore or name with more than 15
characters.
Enter a valid name which does not
include any special character, other
than hyphen and underscore, and is
not more than 15 characters.
The specified file is not a
valid file to import.
Occurs when invalid file is imported through
the Configure Names dialog box.
Import a valid file with appropriate
data in the Configure Names dialog
box.
TABLE 14
Host Connectivity Manager messages (continued)
Message
Cause
Corrective Action or Notes