84
Brocade Adapters Troubleshooting Guide
53-1001582-01
Collecting port data
3
Displaying CEE port properties (CNAs only)
Use the CEE Port Properties panel to display information for a selected converged Ethernet (CEE)
adapter port.
Information such as the following displays:
•
CEE port status
•
FCoE logical link status
•
DCBCXP version
•
Operational CEE configuration
•
Network priority configuration
•
Network priority group ID
•
Bandwidth percentage for given port group
•
Priority flow control status
•
FCoE quality of service that specifies a priority value
To display CEE port properties, use the following steps.
1. Select a CEE port in the device tree.
2. Click the Properties tab in the right pane.
Displaying Ethernet port properties (CNAs only)
The HCM Ethernet Port Properties panel enables you to display the properties associated with a
selected Ethernet port.
Information such as the following displays:
•
Name of Ethernet device
•
Port type
•
Current (FCoE) and factory MAC address
•
IOC identification
•
WWN of hardware
•
Status of port, such as linkup
•
Ethernet logging level
To display Ethernet port properties, use the following steps.
1. Select an Ethernet port in the device tree.
2. Click the Properties tab in the right pane.
Displaying FCoE port properties (CNAs only)
Use the HCM FCoE Port Properties to display FCoE port properties such as the following:
•
PWWN
•
Node WWN
•
Current FCoE MAC address
