xvi
Brocade Adapters Troubleshooting Guide
53-1001582-01
•
Brocade Adapters Administrator’s Guide
•
CIM Provider for Brocade Adapters Installation Guide
FCoE Switch
For information on the Brocade FCoE Switch for connecting stand-up CNAs, refer to the following
publications:
•
Brocade 8000 Hardware Reference Manual
•
WebTools Administrator’s Guide
•
EZSwitchSetup Administrator’s Guide
•
Fabric OS Command Reference Manual
Blade servers and blade system enclosure components
Brocade mezzanine are compatible with blade servers, switch modules, interconnect modules, I/O
modules, and other components that install in supported blade system enclosures. For
compatibility information, visit the blade server and blade system enclosure manufacturer’s
website. Also refer to the Hardware Compatibility section in Chapter 1 of the
Brocade Adapters
Installation and Reference Manual
.
SAN information
White papers, online demonstrations, and data sheets are available through the Brocade website
at:
http://www.brocade.com/products-solutions/products/index.page
For additional Brocade documentation, visit the Brocade website:
Other industry resources
For additional resource information, visit the Technical Committee T11 website. This website
provides interface standards for high-performance and mass storage applications for Fibre
Channel, storage management, and other applications:
For information about the Fibre Channel industry, visit the Fibre Channel Industry Association
website:
Providing details for support
Contact your Brocade FCoE CNA support supplier for hardware, firmware, and software support,
including product repairs and part ordering. Provide the following information: