FastIron third generation modules
The default value of next hop entries on FastIron X Series devices with the following third generation modules installed is 16384. This
value is predefined and not editable.
•
SX-FI48GPP
•
SX-FI-2XG
•
SX-FI-8XG
•
SX-FI-24HF
•
SX-FI-24GPP
If the FastIron X Series device is installed with first generation or second generation modules, the system automatically calculates the
default value for these modules.
Displaying Layer 3 system parameter limits
To display the Layer 3 system parameter defaults, maximum values, and current values, enter the
show default value
command at any
level of the CLI.
The following example shows output on a FastIron X Series with second generation modules.
device#show default value
sys log buffers:50 mac age time:300 sec telnet sessions:5
ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops
ip addr per intf:24
igmp group memb.:140 sec igmp query:60 sec
ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec
ospf transit delay:1 sec
System Parameters Default Maximum Current
ip-arp 4000 64000 4000
ip-static-arp 512 1024 512
some lines omitted for brevity....
hw-traffic-condition 50 1024 50
The following example shows output on a FastIron X Series with third generation modules.
device#show default value
sys log buffers:50 mac age time:300 sec telnet sessions:5
ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops
ip addr per intf:24
igmp group memb.:140 sec igmp query:60 sec
ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec
ospf transit delay:1 sec
System Parameters Default Maximum Current
ip-arp 4000 64000 4000
ip-static-arp 512 1024 512
some lines omitted for brevity....
hw-traffic-condition 50 1024 50
Enabling or disabling routing protocols
This section describes how to enable or disable routing protocols. For complete configuration information about the routing protocols,
refer to the respective chapters in this guide.
The Layer 3 code supports the following protocols:
•
BGP4
•
IGMP
Enabling or disabling routing protocols
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04
147
Summary of Contents for FastIron SX 1600
