20
Brocade FastIron X Series Chassis Hardware Installation Guide
53-1001723-02
Hardware features
1
shows the front panel of the IPv4 and IPv6 management modules with no ports.
FIGURE 11
FSX 800
and
FSX 1600
management module with no ports
shows the front panel of the IPv4 and IPv6 management modules with two 10-GbE ports.
FIGURE 12
FSX 800
and
FSX 1600
management module with two 10-GbE ports
shows the front panel of the IPv4 and IPv6 management modules with eight GbE ports.
FIGURE 13
FSX 800
and
FSX 1600
IPv4 and IPv6 8-port management module
The front panel on the management modules include the following control features:
•
A Console port and 10/100/1000 RJ-45 copper port allow you to access the system’s CLI
directly from a PC or terminal or through a Telnet connection to the PC or terminal.
•
Depending on the type of management modules installed in the device, the management
modules have the following ports:
•
no 10-GbE fiber ports
•
two 10-GbE fiber ports
•
eight GbE copper and fiber ports (four copper and four fiber)
•
LEDs for power and active or standby status
•
Four LEDs for the two 10-GbE fiber ports (2-port 10-GbE modules only)
•
A recessed reset button
10/100/1000 GbE Copper Port on the
FSX 800
and
FSX 1600
management modules
The 10/100/1000 RJ-45 copper port on the management module enables you to attach a PC or
terminal. From this Ethernet port, you can access the system’s CLI or Web Management Interface
directly from the PC or terminal or through a Telnet connection to the PC or terminal.
10-GbE Ports on the
FSX 800
and
FSX 1600
2-port 10-GbE management modules
The
FSX 800
and
FSX 1600
2-port 10-GbE management modules come with two 10-GbE fiber
ports through which you can connect your device to other network devices at a speed of 10
Gigabits per second.
Pwr
Console
Ethernet
10/100/1000
Active
Pwr
Console
1
2
Ethernet
10/100/1000
Active
Link
Act
Link
Act
Console
Pwr
Active
Ethernet
10/100/1000
1 2 3 4
5 6 7 8
