56
Brocade FastIron X Series Chassis Hardware Installation Guide
53-1001723-02
Attaching a management station
2
FIGURE 35
Installing an interface module in the
FSX 1600
chassis
Attaching a management station
You can manage the FastIron X Series system in the following ways:
•
You can connect a PC or terminal to the management module’s serial (Console) port or
10/100/1000 Ethernet port and access the system directly from the PC or terminal, or from a
Telnet connection to the PC or terminal. For more information, refer to
terminal to the console port or 10/100/1000 copper port”
•
You can connect the FastIron X Series switch to your existing management network and
manage the switch, along with other network devices, from a management station. To do this,
you can connect a switch to a Gigabit Ethernet port on the management module. For more
information, refer to
“Attaching a switch to an Ethernet port”
1
Interface module
1
