GSS2520JAN
Instruction Manual
Guide d’utilisation
8
AA 4
X
D
F
A
AA
X
2
.
B
Pre installed Bolt 6
( )
C
Step 2 (D
oor latch assembly
)
a) Align the hole on the front middle side of cart base (A)
with the hole on the latch magnet (F).
b)
Insert the M6 x 15 bolt (AA) into each pre-drilled hole.
c)
Tighten two bolts using the screwdriver provided.
Step 3 (C
art side panel assembly
)
a) Loosen the six pre-installed bolts on the cart base and
leave 1/4 of the bolt's length extending from the cart
base (A).
b) Align the holes on the left side of cart base (A) with the
holes on the cart left panel (B) and tighten the
pre-installed bolts by hand.
c) Repeat the procedure with the cart right panel (C) on
the upper right side of cart base (A).
d) Go back and tighten all bolts using the screwdriver
provided.
Step 4 (Cart back panel assembly)
a) Align the holes on cart left panel (B) with the holes on
the cart back panel (D).
b) Insert one M6 x15 bolt (AA) into each pre-drilled hole
and tighten bolts by hand.
c) Repeat the procedure with cart right panel (C) and
cart back panel (D).
d) Go back and tighten all bolts using screwdriver
provided.