- 16 -
Transformer
Grill
Island materal
Screws
REMEMBER TO LEAK CHECK ALL FITTINGS AND ORIFICES AFTER ALL OF THE CONVERSION IS COMPLETED. TEST FIRE ALL
BURNERS TO ENSURE PROPER AND SAFE OPERATION.
WARNING
.
This outdoor cooking gas appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and
should be plugged directly into a properly grounded three-[prong receptacle. Do not cut or remove the grounding prong from this
plug.
Installing Light Adaptor:
In order to ensure AC Adaptor (
Power Output: 24VAC, 2500mA
Maximum Power Output: 60W Input Requirement: 120VAC, 60Hz,
1000mA; UL Approved)
and interior lights system longevity, the
adaptor must be installed at least 6” above the ground. The
adaptor may be attached to your island material using metal
screws. To install your adaptor, secure 4 screws (not provided)
through the designed mounting tabs (See illustration right. )
Operating Your Grill
CAUTION
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of unauthorized parts
can create an unsafe condition and environment.
The liquid propane gas (LP-gas) supply cylinder(s) to be used must be:
a)
Constructed and marked in accordance with the
Specifications for LP-Gas Cylinders
of the U.S. Department of Transportation
(D.O.T) or the National Standards of Canada, CAN/CSA-B339,
Cylinders, Spheres and Tubes for Transportation of Dangerous
Goods; and Commission
, as applicable; and
b)
Provided with a listed over‐filling prevention device;
c)
Provided with a cylinder connection device compatible with the connection for outdoor cooking appliances.
Only the pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be used. Replacement
pressure regulators and hose assembly must be those specified by the outdoor cooking gas appliance manufacturer. Use only
20-pound cylinders equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances.
The cylinder must include a collar to protect the cylinder valve. Do not drop or handle the cylinder roughly. Disconnect the
propane cylinder from the regulator valve when the grill is not in use.
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance. Store
cylinder outdoors and keep out of the reach of children. Do not store the cylinder in a building, garage or other enclosed areas.
Never store your cylinder where temperatures can reach over 51.7
℃
.
Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the head of the
burner and burner ports. Connect regulator valve and hand tighten firmly. DO NOT obstruct the flow of combustion air or
ventilation air to the grill. Ensure the propane cylinder is in an upright position to allow the gas to leave the cylinder. Otherwise
the overfill prevention device within the cylinder will prevent proper gas flow.
