13
1300 276 642
www.bromic.com/refrigeration
WARNING!
D-USING YOUR COOLER
Start-up
•
This operating manual applies for various device models. Hardware scopes of the models may vary. There
may be diff erences in the pictures.
•
Clean inside and all accessories of your product before the first start up
.
•
If your product has been shaken so much during the transportation and positioning, wait for one (1)
h
our
without running your cooler. Thus, the compressor oil, which may enter into the system, will return back.
You may damage the compressor if you run it without considering this.
•
Insert your product’s plug into an outlet with alternative current of 220-240V/50 Hz only, which has been
installed according to the regulations. (Picture 13)
•
You will hear a slight sound from the compressor when your product is running.
•
The fan inside your product will stop when you open the door of your refrigerator.
•
If the lights of your product are not on, set the 0-1 switch under the canopy to position 1. (Picture 14-15)
Picture 13
Picture 14
Picture 15
16
For LCD Display Coolers;
Your product has units with transparent LCD display placed on the door of your product. You do not need to
take any action to activate these units. When you plug in your product, the unit will be activated and the
display will start playing.
These units placed on your product display images on the transparent display via media cards placed in our
factory. These images can only be changed by authorized technical services.
The door of your product is specially produced in our factory. Never interfere in any door, display or image
malfunctions and call the authorized service immediately.
WARNING!
D-USING YOUR COOLER
Start-up
•
This operating manual applies for various device models. Hardware scopes of the models may vary. There
may be diff erences in the pictures.
•
Clean inside and all accessories of your product before the first start up
.
•
If your product has been shaken so much during the transportation and positioning, wait for one (1)
h
our
without running your cooler. Thus, the compressor oil, which may enter into the system, will return back.
You may damage the compressor if you run it without considering this.
•
Insert your product’s plug into an outlet with alternative current of 220-240V/50 Hz only, which has been
installed according to the regulations. (Picture 13)
•
You will hear a slight sound from the compressor when your product is running.
•
The fan inside your product will stop when you open the door of your refrigerator.
•
If the lights of your product are not on, set the 0-1 switch under the canopy to position 1. (Picture 14-15)
Picture 13
Picture 14
Picture 15
16
For LCD Display Coolers;
Your product has units with transparent LCD display placed on the door of your product. You do not need to
take any action to activate these units. When you plug in your product, the unit will be activated and the
display will start playing.
These units placed on your product display images on the transparent display via media cards placed in our
factory. These images can only be changed by authorized technical services.
The door of your product is specially produced in our factory. Never interfere in any door, display or image
malfunctions and call the authorized service immediately.
