28
bromic.com/heat
OPERATING INSTRUCTIONS
TURNING THE APPLIANCE ON
REMOTE CONTROL FUNCTIONS
(SUPPLIED WITH BROMIC ECLIPSE PENDANT CONTROL)
1.
Using the Remote Control, select the desired Heater setting:
• Heater 100% - Heater output at full (100%).
• Heater 66% - Heater output at 66% of total.
• Heater 33% - Heater output at 33% of total.
2. Using the Remote Control, select the desired Light setting:
• Lights 100% - Lights output at full (100%).
• Lights 50% - Light output at 50% of total.
3. To Lower lights, Press & Hold OFF DIM
^
until the lights have
lowered to the desired level.
4. To Brighten lights, Press & Hold 100% DIM
^
until the
lights have increased to the desired level.
NOTE: It is normal to observe a small dim spot on the LED at the
location where the LED joins together.
TURNING THE APPLIANCE OFF
1.
Using the Remote Control, press on the desired Heater setting:
• Heater OFF - Heater off.
2. Using the Remote Control, select the desired Light setting:
• Lights OFF (DIM
^
) - Light off.
Heater 100%
- Heater output at full (100%)
Heater 66%
- Heater output at 66% of total
Heater 33%
- Heater output at 33% of total
Heater OFF
- Heater off
Lights 100% (DIM˄)
- Lights output at full (100%) or HOLD to DIM Up
Lights 50%
- Light output at 50% of total
Lights OFF (DIM˅)
- Light off or HOLD to DIM Down
