Bromic Heating Medifridge MED0220GD, Instruction Manual

1300 276 642

www.bromicrefrigeration.com.au

9

Controller Alarms

If alarms persist, contact the manufacturer or an approved service agent.

Code

Alarm Type

Corrective Action

HA

Cabinet high temperature alarm

•  Check Installation and operation of unit 

as per instructions

•  Check if there is adequate ventilation
•  Check if there is free circulation of air 

inside the cabinet

•  Check and clean condenser coil and fan
•  Check if door is shut

LA

Cabinet low temperature alarm

P1

Cabinet probe failure

•  Unplug the unit for 1 minute then 

reconnect to power

MAX/MIN temperature recording

IMPORTANT:

 Record the maximum and minimum temperatures two (2) times a day.

Recordings should be taken before the first door opening of the day.

MIN Temperature

i.  Press the       arrow key.
ii.  The 

‘Lo’

 message will be displayed followed by the minimum temperature recorded.

iii.  Press the       arrow key again or wait 5 seconds – the normal display will be displayed.

MAX Temperature

i.  Press the       arrow key.
ii.  The 

‘Hi’

 message will be displayed followed by the maximum temperature recorded.

iii.  Press the       arrow key again or wait 5 seconds – the normal temperature will be 

displayed.

Reset MAX/MIN temperature recorded

i.  While the MAX or MIN temperature recorded is displayed – press the           key for more 

than 3 seconds. The 

‘rSt’ 

message will be displayed.

ii.  The 

‘rSt’ 

message will start blinking and the normal temperature will be displayed.