1300 276 642
www.bromic.com/refrigeration
10
6. PRODUCT LOADING AND STORAGE
Start-up
•
Clean the interior surface with a soft cloth and warm water before loading.
•
Ensure there is free circulation of air between the products.
•
Do not block the evaporator fan.
•
Do not overstock the refrigerator.
•
Use cold mass (i.e. water bottle) on unused shelves.
•
Keep refrigerator door openings to a minimum.
•
Ensure products are between 2 and 8°C before loading – if there is a breach in the cold-
chain, isolate the affected products. Do not use or discard until advise is given.
•
Some products are sensitive to ultraviolet (UV) light, please see storage guidelines from
the manufacturer before removing from packaging.
•
Do not store food and other goods in the refrigerator.
•
Maximum recommended shelf load is 20kg.
NOTE: Bromic cannot be responsible for loss of stock or damage to stock.
Please refer to the ‘National Vaccine Storage Guidelines: Strive for 5’ for more information on
vaccine storage and handling or contact your local state or territory health department.
(http://www.health.gov.au/internet/immunise/publishing.nsf/content/IMM77-cnt)
WARNING
: Failure to follow the guidelines below will result in
cabinet temperatures above 8°C
IMPORTANT
: Run the refrigerator for at least 2 hours before loading.
