background image

1300 276 642

www.bromic.com/refrigeration

11

Extended Defrosting

The evaporator (cooling) coil of the refrigerator may build up a layer of ice over time. This 
will reduce the performance of the unit – inspect the evaporator coil for ice build-up regularly.

 

For extended defrosting, turn off the unit with the door opened for a period of 24 hours. 

Condenser Coil

IMPORTANT:

 The condenser coil must be cleaned with a vacuum or brush once a 

month. The condenser coil must be cleaned regularly to maintain the performance 
and minimise power consumption. A poorly maintained condenser coil can lead to 
failure of the unit and cabinet temperatures above 8°C.

7.  MAINTENANCE

Cleaning the Cabinet

• 

Remove the products and transfer to a suitable location prior to cleaning the inside of the 
cabinet.

• 

Do not use any aggressive or abrasive cleaning agents. 

• 

Never use a water hose or a high-pressure jet to clean.

• 

Do not use sharp or pointed objects for cleaning.

• 

Clean the inside and outside of the appliance with a clean damp cloth or with a neutral 
cleanser.

• 

Dry all surfaces with a dry cloth.

WARNING

: Disconnect the appliance from the power supply before performing any 

maintenance. Never unplug the appliance by pulling on the cord. Always grasp the 
plug firmly and pull straight out of the outlet.

WARNING

: Exposure to significant water ingress will void warranty and cause 

potential safety issues. If the unit should be exposed to water, please contact the 
manufacturer immediately.

IMPORTANT: Warranty may be void if there is no evidence of preventative 
maintenance is performed on the appliance.

Summary of Contents for MEDIFRIDGE MEDO220GD
















Reviews: