19
9.3 enable/disable buzzer / ready tone (buz)
The LED “buz” is selected using the „aux“ key (9). The ready buzzer sounds when the 100% char-
ge is available. The ready buzzer can be switched on or off (on/--) by briefly actuating the power
selector keys "
q
/
p
" (18) of channel 2. When the buzzer tone is enabled, the LED next to "buz" will
light up.
9.4 enable/disable "beep" alarm tone (beep)
The alarm tone will sound when an underride/overide of the permissible control range occurs
while adjustments are being attempted. The info index is opened by simultaneously pressing the
"aux" (9) and "mod" (7) keys for 2 seconds. Actuate the keys (16) of channel 1 to select the "bEEP"
option and select either "on" to activate or "--" to deactivate the function using keys (18) of channel
2. Exit the info index by actuating the "aux" key (9).
9.5 modelling light option "l120"
Senso power packs allow the use of 120 V modelling lamps in 100–230 V regions without having to
exchange the lamps. The info index is opened by simultaneously pressing the "aux" (9) and "mod"
(7) keys for 2 seconds. Actuate the keys (16) of channel 1 to select the "L120" option and select
either "on" to activate or "--" to deactivate the function using keys (18) of channel 2. Exit the info
index by actuating the "aux" key (9).
note: switching from 115 V to 230 V with the mains selector switch (19) automatically enables
the l120 function. the protective function allows the use of a 120 V modelling lamp when the
unit is set on 230 V. when changing to a 230 V modelling lamp, it is strongly recommended to
deactivate the l120 protective function.
