27
15. flex 70 x 70 softbox
15.1 assembly (see illustrations)
1. Slip all four metal rods through the rubber loops inside the
reflector. Make sure the protective caps of the rods face outwards
2. Insert all four plastic caps in the cordura pockets on the edge
of the reflector
3. Slip metal rods into the adapter ring holes of the right format
4. Assembly is easiest if you first mount the rods on opposite sides
5. Close all four Velcro
®
fasteners
6. Pull the diffuser over the open reflector
15.2 disassembly
•
Follow steps 1 to 6 in reverse order
•
Steps 2 and 1 are not mandatory – the softbox Flex 70 x 70 can also be folded with the metal
rods in place
attention: do not connect the flex 70 x 70 softbox to broncolor hmI lamps!