4
WATER FILTRATION PROCESS
The 3-stage H2O+ Cypress H630 water filtration system
1
COMPOSITE PLUS FILTER (HF-31)
This 2-step filter reduces particulate materials such as sand, rust, and fine particles from the water supply.
This first filter also acts as a pre-filter protecting the 2 following filter systems.
2
NANOTRAP FILTER (HF-32)
This specialized filter reduces turbidity and additional particulate material.
3
CARBON BLOCK FILTER (HF-33)
As the final stage in the filtration process, the Carbon Block filter reduces particulates, odors, and water
contaminants such as chlorine and volatile organic compounds, improving the taste of the dispensed water.
* See performance data sheet for certified claims
COMPOSITE PLUS
FILTER
NANOTRAP
FILTER
CARBON BLOCK
FILTER
1
2
3
1
2
3
READ BEFORE YOU INSTALL THIS PRODUCT
The following instructions describe how to remove the gray plug from the elbow joint that is connected
at the back of your Cypress water filtration unit.
NOTE:
Use this technique when changing the filters as well.
1.
Remove the Quick Connect tool from the underside of the Top Cover
2.
Between the elbow and the gray plug is a thin white collar. Using the Quick Connect tool, push
down on the ring toward the elbow
3.
At the same time, pull the gray plug out in the opposite direction.
