Host Commands
Polycold Cryochiller
System Configuration Commands
Installation and Operation Manual
Brooks Automation
7-10
214072 Revision B
VENDOR_ID Get the DeviceNet Vendor ID
IP_ADDR IP Address
DEFAULT_GATEWAY Default Gateway
Purpose:
Returns identifier string indicating the vendor ID.
Only returns a value if DeviceNet config is installed
Parameter(s):
?
Return Value:
[A][cccccccc]
Default Value:
N/A
Security Level:
Get: 1
Set: N/A
Example:
“VENDOR_ID,?”
Interface
RS-232, Ethernet
Purpose:
Get/set the IP Address for the system.
Parameter(s):
? or [nnn.nnn.nnn.nnn]
[nnn.nnn.nnn.nnn] is the IP address
Return Value:
[A] or [A][nnn.nnn.nnn.nnn]
Default Value:
0.0.0.0
Security Level:
Get: 1
Set: 3
Example:
“IP_ADDR,192.168.1.100” Set the IP Address for host port
Interface:
RS-232, Ethernet
Purpose:
Get/set the default network gateway for the system.
Parameter(s):
? or [nnn.nnn.nnn.nnn]
[nnn.nnn.nnn.nnn] is the Gateway address
Return Value:
[A] or [A][nnn.nnn.nnn.nnn]
Default Value:
0.0.0.0
Security Level:
Get: 1
Set: 3
Example:
“DEFAULT_GATEWAY,192.168.1.1” Set the default gateway for host port
Interface
RS-232, Ethernet
