21
1.2.7
Installing the Seat
The seat assembly now needs to be fitted to the seat post on the carriage.
Carry this out as follows:
1.
Fold up the seat arms and seat base.
2.
Fit Seat Index Plate Cover. Ensure that all
wires are clear and will not become trapped.
Position the index plate as arrowed below.
3.
Position the seat on top of the seat post
protruding from the chassis.
4.
With the seat facing across the stairs,
hold the swivel locking handle down,
and gently twist the seat from side to
side, easing it downwards.
Do this until the seat will not lower any
more, and check that the seat post
appears flush with the top of the seat
frame.
5.
Release the seat swivel lever and
rotate the seat until it is locked into the
normal riding position – facing
across the stairs.
6.
Connect the electrical connection
between the seat and the carriage, by
pushing together the ‘DIN’ plugs, and
screwing the collars to ensure a safe,
permanent connection.
7.
Check that the key switch on the upper
carriage safety pad is in the ‘ON’ position and
that the seat is in a locked position facing
across the stairs (see point 5).
Summary of Contents for Stairlift
