23
22
USING AUX IN
1. Plug one end of a 3.5mm-to-3.5mm cable (not
included) into your audio device, just like you would a pair
of headphones.
2. Lift the port cover and plug the other end of the cable
into the speaker’s AUX IN port.
3. Press the MODE BUTTON on the remote or in the
Eluma Cube app to switch to Aux In mode. The speaker
will announce “Line In.”
4. Use your audio device to control music playback.
5. Use your audio device, the remote control or the
Eluma Cube app to control volume.
6. Press the MODE BUTTON on the remote or in the
Eluma Cube app to switch to Bluetooth mode. The
speaker will announce “Bluetooth.”
SELECTING LIGHT MODES
1. Press the FLASH BUTTON on the remote or in the
Eluma Cube app to activate the Flash mode, a fast
transition of Red, Green, Blue, Purple, Yellow, Cyan,
Orange and White lights.
2. Press the STROBE BUTTON on the remote or in the
Eluma Cube app to activate the Strobe mode, a fast flash
of the last color selected.
3. Press the FADE BUTTON on the remote or in the
Eluma Cube app to activate the Fade mode, a slow
fading in and out of the Red, Green and Blue lights.
4. Press the SMOOTH BUTTON on the remote or in the
Eluma Cube app to activate the SMOOTH mode, a slow
transition of Pink, Purple, Blue, Cyan, Green, Yellow and
Orange lights.
5. Press the BEAT BUTTON on the remote or in the
Eluma Cube app to activate the BEAT mode, rapid color
changing of light colors to the beat of the music.
Note: If there is no beat detected (volume is too low or audio
does not have enough bass), Beat mode defaults to Smooth mode.
