14
15
318418
Big_Blue_100
Size:5”W
x4.75”H_Output:100%_Prints:1/1,Blk
USING AUX IN
Connect your audio device to the Big Blue 100 with a 3.5mm-to-3.5mm cable (not
included).
1. Plug one end of the cable into your audio device, just like you would a pair of
headphones.
2. Plug the other end of the cable into the 3.5mm port labeled AUX IN on the Big
Blue 100. The WI-FI STATUS LED INDICATOR will be solid yellow.
3. Use your audio device to control music playback. Adjust volume with your
audio device or with the volume controls on Big Blue 100.
LED RING ON/OFF
1. Press and hold both the VOLUME - BUTTON and the BUTTON
for 3 seconds to turn the LED RING off.
2. Press and hold both the VOLUME - BUTTON and the BUTTON to
turn the LED RING on.
Note: When the LED RING setting is off and the VOLUME - and
BUTTONS are pressed, the VOLUME LEVEL LED INDICATORS show the
volume level for 5 seconds then the LED RING turns off.
WI-FI SETTINGS RESET
1. With Big Blue 100 powered on, p
ress and hold the WI-FI
®
SET UP/RESET
BUTTON until the LED RING turns off (approximately 5 seconds). The WI-FI
STATUS LED INDICATOR is solid white for several seconds while the Big Blue
100 resets.
2. After reset is complete, the WI-FI STATUS LED INDICATOR is solid red for
several seconds while the Big Blue 100 is booting up. The WI-FI STATUS
LED INDICATOR may turn on and off during the booting up process, this is
normal.
3. After booting is complete, the WI-FI STATUS LED INDICATOR continuously
flashes white, indicating the Big Blue 100 is ready to be connected to a
Wi-Fi network through the Google Home app.
