CHARGING
1. Twist the battery cover (3) counterclockwise and lift to remove
the battery cover.
2. Connect the included Micro USB cable to the Micro USB
charging port and connect to a USB power source, such as a
laptop, to recharge the installed battery.
3. The charging indicator light will illuminate when charging. The
light will turn off when fully charged in approximately 1.5
hours.
4. When fully charged, remove the micro USB cable. Close the
battery cover, using the alignment markings to properly align
the cover, and twist clockwise.
CARE AND MAINTENANCE
Clean the massager with a soft, damp cloth. DO NOT submerge
in liquid or clean with an alcohol or chemical-based cleaner.
SPECIFICATIONS
Power .......................................................................................................................................2W
Rated DC Voltage ......................................................... 3.7V (Lithium-Polymer)
Lithium Polymer Battery .............................................................................500 mAh
Dimensions ............Approx. 2.75 x 2.75 x 3.5 in. (70 x 70 x 89 mm)
Weight, with Battery and Cable ..................................Approx. 6 oz (170g)
Charging Time ................................................................................Approx. 1.5 hours
Continuous Run Time ........................................................................Up to 2 hours
10
11
