SETUP INSTRUCTIONS
Adding first fingerprint (Administrator)
1. Press and hold the fingerprint collection
window. Lift your finger after you see the
blue light.
2. The green light will then start flashing
rapidly. Press your finger you want to use 10
times repeatedly. Try and touch different
parts of you fingerprint each time. When the
green light shows a long flash, it means it
registered your fingerprint successfully.
During set up process, if you wait 5 seconds
without touching the fingerprint scanner,
the set up process will time out.
Note: Please collect fingerprints from multiple
angles to help expand database. This will allow
for better sensitivity.
