21
Caution
z
If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If it still feels too
strong, stop operation immediately and contact Inada.
→
May result in injury if you continue use with high stimulation under such circumstances.
z
Do not place your hands or feet into the roller tracks, into the space between the seat back and the seat or into the
moving parts.
z
Do not sit wearing hard objects, such as hair accessories or jewelry.
z
If your leg or foot comes out of the footrest during the massage, do not try to force it back in.
z
Keep massage sessions to no more than 15 minutes in length. Do not exceed 5 minutes for an area-specific
massage of any particular part of the body.
→
Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired
effect, or even injury.
The total amount of massage time in a day should be limited to about 30 minutes.
Air Massage Intensity Adjustment and Cancellation
The air massage intensity can be adjusted.
Each time the Air intensity button is pressed, the intensity changes in the order of Low,
Medium and High.
(The default setting when the session starts is Medium.)
When the air intensity is Low, Medium, or High, the buttons light green, orange, or red,
respectively.
Stopping in the Middle of a Massage
If the Pause button is pressed, all the massage movements pause. To restart the massage, press the Pause
button. To stop in the middle of a massage, press the Power button. The rollers return to their storage
positions and stop. After movement has stopped, use the Reclining buttons to raise the reclined backrest.
❺
The program finishes.
When the massage program finishes, the rollers return to their storage positions (upper part of the
seat back) and the power to the remote control is shut off.
However, reclining the seat back, angle adjustment of the footrest, and ON/OFF of the heater are still
enabled.
When 2 sessions have been combined, at the conclusion of the first selected session, the second
selected session commences and the button for the second session changes from flashing
intermittently to a steady glow. The second session then commences.
[P
R
E
-P
R
O
G
R
A
M
M
E
D
M
A
S
S
A
G
E S
E
S
S
IO
N
S
]
Changing the Massage Program
You can change to another program without having to wait until the current program finishes. However, note
that after a total duration of 30 minutes, the program in progress stops even if not completed.
Switching from One Preset Program to Another
When a preset program button is pressed while another preset program is in progress, the rollers return to
the previously detected shoulder positions, and the shoulder positions are checked again before the program
starts. You can adjust the shoulder positions while they are being checked again.
Switching from a Preset Program to a Manual Program
When a manual program button is pressed while a preset program is in progress, the preset program
immediately stops, and the selected operation starts.
When the movement to detect the shoulder positions was selected, the session restarts after the shoulder
positions were reconfirmed. The shoulder positions can be adjusted while the shoulder positions are being
reconfirmed.
Summary of Contents for INADA Signature HCP-S8900A
Page 2: ......
