background image

26

FAQ

Can I put the chair onto a wooden 

floor or a heated floor?

Yes.

However, because the chair could damage 

the floor surface, we recommend laying a 

carpet or something similar under the chair. 

(Same applies to other floor surfaces)

I spilled water on the chair. What 
should I do?

There is a danger of an electric 
shock. Immediately stop using the 
chair and perform the following.

 Turn off the main power switch on the 

back left of the chair.

 

Unplug the power plug from the wall 
outlet.

After performing the above, contact Inada for 
assistance.

Can someone who is under 5 feet 
or over 6 feet use the chair?

Yes.

Because the correct shoulder positions may 
not be found during shiatsu point locating, 
we recommend using the chair as follows.

 Short person: Raise the reclining seat 

back.

 Tall person: Recline the reclining seat 

back.

 After shiatsu point locating is performed, 

adjust the shoulder positions.

How do I make the massage 
stronger?

Perform any of the following:

 

Sit back further in the chair so that your 
weight is against the reclining seat back.

 

Lower the reclining seat back.

 

Remove the buffer pad placed on the 
back pad.

 

Use the foot shiatsu pads.

With the methods above, you can intensify 
the massage.

How do I make the massage 
lighter?

Perform any of the following:

● 

Raise the reclining seat back.

● 

Place the buffer pad on the back pad.

● 

Remove the foot shiatsu pads.

With the methods above, you can make the 
massage more gentle.

[F

A

Q]

Summary of Contents for INADA Signature HCP-S8900A

































Reviews: