30
the projector’s remote control isn’t functioning.
•
If the status light on the remote flashes each time your press a button on the remote,
the problem is not with your remote .
•
Try moving closer to the projector with the remote .
•
Check that the batteries are functioning and inserted properly .
•
Try re-pairing the remote (see “Operating the Projector” on page 15) .
the projector is not projecting.
•
Check that there are no obstructions between the projector and the projection surface .
•
Check the battery charge on the projector . If depleted, try powering the projector on
while the unit is plugged into power .
•
If plugged into power, check that the charging indicator light on the unit is illuminated .
•
Power the unit off, press the restart button, and power the unit back on .
•
If connected to the projector with a cabled HDMI connection:
- Check that the HDMI cable is securely plugged into the HDMI port on your device and the
HDMI port on the projector .
- Check that you are using any necessary adapters or cables to connect your device . Also check
with your device manufacturer to ensure your device supports HDMI video out and you are