Brookstone Massage1, Manual

11

12

PREPARATION BEFORE USE POWER ON/OFF

1.  Place Massage 1 into a sturdy chair. You may optionally secure Massage 1 to your 
     chair with strap. Insert power adapter into power cord. Push until "click" sound is 
     heard. 

2.  Insert power adapter plug into AC 120V 60HZ electric outlet.

3.  Press on the remote to turn the unit on.

4.  Press again to turn the unit off.

OVERALL MASSAGE

1.  Select and combine massage programs from NECK, 
     BACK and SEAT according to your preference.

2.  The selected massage programs begin.

3.  During operation, you can adjust the roller width, neck 
     position, roller options. Activate dynamic squeeze, 
     heat.....etc. depending on the selected massage.

4.  After the massage is completed, the rollers will return 
     to the storage position.

5.  Unplug its power plug from the electrical outlet when unit is not in use.

    Note: The unit shuts off automatically after approximately 20 minutes.

CARE AND MAINTENANCE

•  Wipe dust and dirt off the Massage 1 with a dry, soft cloth after use.
•  Keep the Massage 1 clean and away from places of high humidity.

SAFETY

1.    Never leave the unit unattended, especially if children are present.

2.    Never cover the unit when it is in operation.

3.    Do not use this unit for more than 20 minutes at a time.

4.    Extensive use at any time could lead to excessive heating that shortens the life 
      of this unit. Should this occur, discontinue use and allow the unit to cool before 
      operating.

5.    Never use this unit directly on swollen/inflamed areas of the skin or on areas of 
       skin eruptions. Do not use in the presence of unexplained back pain.

6.    This is a non-professional unit designed to provide soothing massage to muscles. 
       Do not use as a substitute for medical attention.

7.    Do not use while in bed or before going to sleep. The massage can create a 
       stimulating effect and delay sleep.

8.    This unit should never be used by any individual suffering from any physical 
       ailment that would limit the user’s capacity to operate the controls.

9.    Extreme heat or cold may damage the unit.

10.  Place the unit in a safe, cool, dry place when not in use.

11.  Do not submerge the unit in liquid.