4
usinG Grill Tools
Your grill tools come inside a dual purpose case that is used both for storing the
tools and also as a tool hanging stand, if desired. Tools include a spatula, fork and
tongs, and one clip-on grill tool light. The spatula also has a built in bottle opener.
NOTe: remove protective safety tip covers from fork before use.
• Installing light on Fork or Spatula: Clip the rubber side grips of the light onto the
top of the tool at approximately the middle of the handle. You can also clip it on
the lower section of the handle then slowly slide it up away from the tool end.
• The light is turned on and off with the button on top of the light.
• Installing light on Tongs: The light stays attached to the tongs by way of the
magnet on the underside of the light. Choose a spot on the outer middle section
of either arm of the tongs to attach the light.
• To use the case as a tool holder, turn the case inside out so you can see the tool
pockets, then fold the three sections inward and pull the three rubber tabs over
the chrome pins to secure. You can then hang each tool by its top cable, over the
three large chrome hang pins.
cleaninG Grill Tools and case
1. Use mild dish washing detergent and sponge to clean case. Rinse thoroughly,
then hand-dry or air dry.
2 Tools are dishwasher-safe. Do not use harsh abrasives or wire brush to clean tools.
3. Wipe the clip-on tool light with a soft, slightly damp cloth. DO NOT clean light in
dishwasher or submerge in water.
78
20
41
_I
N
S
_S
ta
in
le
ss
S
te
el
g
ril
l S
et
S
iz
e:
5”
W
x4
.7
5”
H
_O
ut
pu
t:1
00
%
_P
rin
ts
:1
/1
,B
lk