9
fliGhT check
1. Move the helicopter’s ON/OFF SWITCH on the helicopter’s MAIN HOUSING
to ON and make sure the THROTTLE is in the down position.
2. Place the helicopter on the floor, pointed away from you, spectators, pets and
breakable items.
3. Stand back, and move the remote's power switch to ON.
leT’s flY!
1. With both the remote and helicopter ON, place the helicopter on the floor, pointed
away from you, spectators, pets and breakable items—and get ready for takeoff!
2. Increase the THROTTLE until the helicopter leaves the floor, then back the
THROTTLE off to approximately half-speed to maintain a steady height. Cloud
Force has a built-in gyroscope to help it maintain a smooth flight, plus makes it
easy to maneuver.
3. Use very slight right and left adjustments with the RIGHT/LEFT TURN & FRONT/
BACK CONTROL to allow the helicopter to move to the right, left, forward and
backward. For sweeping turns, roll the RIGHT/LEFT TURN & FRONT/BACK
CONTROL a little, or a lot, for wide or tight circles. You can also make sweeping
turns going backwards.
4. If your helicopter is heading for a collision with a spectator or hard object,
cut the THROTTLE to prevent damage.
5. Gentle and patient use of the controls will provide the most control of
the helicopter.
6. Have fun!
