3-32
IRAS-24A T1/ISDN Modem Card Installation and Reference Guide
10.
When you
complete your selections, click
OK.
NOTE:
If you are not sure which protocols to choose, refer
to the Windows NT Server documentation, or
click
Help.
11.
When the Remote Access Setup window is
redisplayed, click
Continue
.
Windows NT Setup posts an informational message
to let you know that it is configuring the RAS ports.
12.
At the Setup Message screen, click
OK
.
13.
When the Network dialog box is displayed, click
Close
.
Windows NT Setup binds the network protocols to
the IRAS-24A ports and displays informational
progress messages.
NOTE:
If you need to reinstall your service pack, answer
“No” at the Network Settings Change screen and
immediately reinstall the service pack at this time.
14.
At the Network Settings Change screen (Figure 3-21),
click
Yes
to reboot the server so that the changes to the
network take effect.
Once the system has completely shutdown, do a cold
boot by shutting the computer off, wait a few seconds,
then turn it back on to reboot.
Figure 3-21 Network Settings Change Screen
Summary of Contents for IRAS-24A w/ T1-RBS
