airplus 1.1E
Last updated 26-03-13
Page 4 of 12
2
Safety
The following information must be read carefully to ensure safe installation and operation of
the Brookvent PIV system.
2.1
General Safety
•
Do not use this appliance for functions other than those described in this booklet.
•
Never touch the appliance with wet hands.
•
The unit is only suitable for 230 V AC/50Hz electric mains.
•
Never modify the fan or electronics, all repairs must be conducted by Brookvent.
•
Never connect the power if the electronics enclosure is open.
•
Do not store inflammable products in the neighbourhood of the unit.
2.2
Responsibility of the Installer
•
Correct Installation and commissioning of the PIV unit.
•
Record measured air flow at the supply valve.
•
Compliance to requirements and local additional rules.
•
Explanation of the ventilation system to the user.
•
Warning for the user, to check or replace the air filters on time.
•
All the above, as set out in the latest edition of the Domestic Ventilation Compliance
Guide and the Appendix Q – Installation Guide and Checklist.
2.2
Responsibility of the Occupant
•
Replacement of the filters every 5 years by contacting Brookvent for a replacement.
•
Cleaning the supply valve regularly to prevent blockage.
•
To ensure that the system is functioning properly by periodically checking the airflow
•
To ensure the system is always left on unless serviced by an authorised person.
IMPORTANT: Dirty or clogged filters may cause inadequate ventilation in the home which
may lead to health issues. It is important that the filters are changed
after 5 years
or sooner
if required.
