airplus 1.1E
Last updated 26-03-13
Page 7 of 12
Blanking strip can be cut to length and held in place with the hook and loop tape as shown.
Fig 1. Add Velcro Tabs to diffuser cover where required
Fig 2. Fit Blanking strip (block 1 or 2 openings)
Fig 3. Diffuser cover fitted to diffuser body
4.2
Ductwork and Connections
Use the supplied 125mm flexible ducting, which should be cut to the minimum required
length to reduce pressure loss in the system.
Connect the ducting to the outlet on the unit and the diffuser opening, and seal with suitable
duct tape and / or sealant.
