BROSA Cooper Tub Armchair Assembly Manual Download

Page: 3 / 4

Step 1

D x 1

C x 4

B x 4

A x 4

Align a leg

(A)

so that the screw slots are overlapping.

Fit a washer

(C)

to a bolt

(B)

and fit it into one of the

screw holes. Repeat for the second screw to fit the leg

onto the body of the chair. Turn the bolt with the

allen key

(D)

until it is secure but do not tighten yet.

Repeat for all four legs.

Step 2

Lift the chair off the ground and turn it right side up

while being careful not to put any pressure on the

legs while you turn the chair.

Summary of Contents for Cooper Tub Armchair

Page 1: ...ASSEMBLY GUIDE Cooper Tub Armchair v1 0 ...

Page 2: ...ed inside the body you will learn how to access and utilise these components in the next steps Turn the chair body so that the underside is facing you Follow the coloured string to the component compartment Unzip this and take out the additional components then zip it back up Chair body x 1 Unpacking A x 4 Leg B x 4 Bolt C x 4 Washer D x 1 Allen Key ...

Page 3: ...he screw holes Repeat for the second screw to fit the leg onto the body of the chair Turn the bolt with the allen key D until it is secure but do not tighten yet Repeat for all four legs Step 2 Lift the chair off the ground and turn it right side up while being careful not to put any pressure on the legs while you turn the chair A D B C ...

Page 4: ...3 Place the chair on a flat surface then sit on the chair and shift your weight around until the legs are level and the chair does not rock Then use the allen key D to tighten all the bolts Enjoy your new armchair ...