Step 7
Insert a dowel
(B)
into each of the inner holes along the
top panel and a cam screw
(C)
into each of the outer
holes. Align the top panel to the structure and firmly
press together. Insert a cam lock
(E)
into each of the
four holes inside the structure as shown.
Step 8
Cover the cam locks
(E)
inside the structure with a
plastic cap
(R)
. Insert a dowel
(B)
into the top of the leg
and align it to the underside of the base. Press the leg
firmly in place and using the allen key
(J)
to tighten the
bolt on the bottom of the leg until secure. Peel off the
paper to reveal the adhesive on the plastic cover
(S)
and place it on the bottom of the leg. Repeat the same
process for the other legs.
B x 6
C x 6
E x 6
B x 4
J x 1
R x 4
S x 4
B
C
E
R
B
J
S
Summary of Contents for Edgar Dresser
Page 1: ...ASSEMBLY GUIDE Edgar Dresser v1 0...
Page 3: ...Hardware You will need...
