Step 1
C x 8
A x 8
D x 8
Insert a dowel
(A)
in the bottom hole on either side of
each support beam and a cam screw
(C)
in each of the
top holes on either side. Align a support beam to a side
panel and firmly press together. Insert a cam lock
(D)
into the hole as shown in the diagram to secure the
support beam in place. Repeat for the remaining
support beams. Align the other side panel and firmly
press together then fitting the remaining cam locks
(D)
in place to secure the structure.
Step 2
C x 4
A x 4
D x 4
Insert a dowel
(A)
into each inner hole on the base and
a cam screw
(C)
in each of the outer holes. Align the
base to the structure formed in the previous step and
firmly press together. Insert a cam lock
(D)
into each
hole as shown in the diagram.
C
A
D
C
A
D
