Step 3
Insert wooden dowels
(F)
into corresponding holes on
both upper and lower support beams
(5 & 6)
as shown
in the diagram.
F x 8
Step 4
4.1
Insert a cross dowel
(H)
into the hole at the top of
each leg
(8 & 9)
and make sure it faces the correct
direction as the zoomed-in diagram instructs.
4.2
Insert a threaded bolt
(J)
into the hole on the side
face of each leg
(8 & 9)
and screw it tightly in place.
H x 4
J x 4
