Step 8
8.1
Insert screws
(E)
into both holes on the upper
support beam
(5)
as shown in the diagram.
8.2
Align a leg
(8 or 9)
with the bottom of the structure
and make sure the threaded bolt
(J)
protrudes from the
metal bracket. Fit a flat washer
(K)
to the bolt
(J)
followed by a lock washer
(L)
and a nut
(M).
Tighten
the nut in place using the spanner
(N)
. Repeat this for
the remaining legs
(8 & 9)
.
K x 4
E x 2
L x 4
M x 4
N x 1
