Insert cam screw
(D)
into the holes on the sides of the
front panel of the draw and one in the bottom center.
Place dowels
(F)
in the remaining two holes along the
bottom of the panel. Align to the draw and firmly press
together. Insert a cam lock
(E)
in the hole in the
support panel underneath as well as two in the in each
side of the draw followed by a plastic cap
(W)
.
Repeat for the other two draws.
Step 13
Align the handle
(U)
to the corresponding holes and
use screws
(V)
to fix into place. Insert the draws to
their corresponding slots.
Step 14
D
W
E
F
D x 15
E x 15
F x 6
W x 15
V
U
U x 3
V x 6
