Evolution 5 Multi-fuel Issue 1 21/07/2015
18
Smoke Control Area Exemption Requirements
Additional Operational Requirements for Smoke Control Areas
1.
It is important to follow the smoke exempt instructions in order to achieve clean
burning and to maximise the efficiency from the stove
2.
Do not leave the fire unattended after refuelling until flames are well established on
the newly charged logs
3.
Refuelling on to a low fire bed
If there is insufficient burning material in the firebed
to light a new fuel charge, excessive smoke emission can occur. Refuelling
must be carried out onto a sufficient quantity of glowing embers and ash that the
new fuel charge will ignite in a reasonable period. If there are too few embers in the
fire bed, add suitable kindling to prevent excessive smoke
4.
Fuel overloading
The maximum amount of fuel specified in this manual should not
be exceeded, overloading can cause excess smoke.
5.
Operation with door left open
Operation with the door open can cause excess
smoke. The appliance must not be operated with the appliance door left open
except as directed in the instructions.
6.
Dampers left open
Operation with the air controls or dampers open can cause
excess smoke. The appliance must not be operated with air controls or dampers
door left open except as directed in the instructions.
